VBus®-Accessories
DL3 Datalogger
Be it solar thermal, heating or DHW heat exchange
controllers – with the RESOL DL3 you can easily and
conveniently log system data of up to 6 controllers. Get
a comprehensive overview of all controllers connected
with the large full graphic display. Transfer data with an SD
memory card or a USB memory stick, or use the LAN
interface to view and process data on your PC.
- Data logging and parameterisation of up to 6 VBus® master devices
- Temperature measurements and logging via integrated sensor inputs possible
- Current loop interface 0(4)-20 mA
- BACnet functionality for BACnet-conform transmission and reception of data
- Parameterisation and readout of controller data via integrated Web interface
- Data logging onto SD card
- Firmware update possible over SD card or Internet
- SD card included
- 192 MB internal data memory
DL2 Datalogger
This additional module enables the acquisition and storage of large amounts of data (such as measuring and balance values of the solar system) over a long period of time. The DL2 can be configured and read-out with a standard internet browser via its integrated web interface. For transmission of the data stored in the internal memory of the DL2 to a PC, an SD card can be used. The DL2 is appropriate for all controllers with RESOL VBus®. The datalogger can be connected directly to a PC or router for remote enquiry and thus enables comfortable system monitoring for yield monitoring or for diagnostics of faults.
- Visualisation of system states
- Yield monitoring
- Easy error diagnostics
- Easy configuration by integrated web interface for standard internet browsers
- Export function for further data processing in spreadsheet programs
- Direct connection of PC or router for remote enquiry
VBus®/USB interface adapter
The new VBus®/USB interface adapter is the interface between the controller and a personal computer. With its standard mini- USB-Port it enables a fast transmission of system data for processing, visualising and archiving as well as the parametrisation of the controller via the VBus®. A full version of the RESOL ServiceCenter software is included.
ServiceCenter Software RSC
The modular designed software enables PC-recording of the data measured by the controller, editing of the data files for further processing by standard spreadsheet programs and visualisation of individual systems with all measuring and balancing values.
- VBus®-record and Designer as described before in light-version, but additionally:
- Designer: allows the positioning of the VBus® values on a customised background graphic; in this way, system visualisations for any solar system can be presented in real-time
- Dataloggers: possibility to manage any number of datalogger; the ServiceCenter establishes connection at the push of a button, reads out the data, if necessary, deletes data from the logger and converts data into a text file
- Parametrisation: DeltaSol® M, E, ES and the BS-series (and future versions of the product family) can be configurated user-friendly with a PC; the values are checked for domains and possible overlapping and are transferred to the controller via VBus®.
- USB 2.0 full speed compatible
- With mini-USB-B-port
- Remote parametrisation of the controller via VBus®
- Full version of RSC software included on CD-ROM
VBus®/LAN interface adapter
The VBus®/LAN interface adapter is designed for the direct connection of the controller to a PC or router. It enables easy access to the controller via the local network of the owner. Thus, controller access, system parametrisation and data read-out can be effected from every workstation of the network. The VBus®/LAN interface adapter is suitable for all controllers equipped with a RESOL VBus®. A full version of the RESOL ServiceCenter software is included.
- The network connection for your solar system
- Access to the system via the complete network
- Remote parametrisation of the controller via VBus®
- RSC software included on CD-ROM
VBus®/PWM interface adapter
The VBus® / PWM interface adapter enables the speed control of two high-efficiency
pumps even without an integrated PWM-output on the system`s controller. The
adapter is installed between the VBus® output of the controller and the PWM-input
of the high-efficiency pump, where it transforms the VBus® data packets into a 0-10 V
or a PWM signal.
- Speed control of high-efficiency pumps for controllers without integrated PWM outputs
- Convertible from PWM to 0-10 V signal
AM1 Alarm module
The Alarm module AM1 is designed to signal system failures. It is to be connected to the VBus® of the controller and issues an optical signal via the red LED if a failure has occurred. The AM1 also has a potential-free relay output, which can e. g. be connected to a building management system (BMS). Thus, a collective error message can be issued in the case of a system failure. Depending on the controller and the sensors connected, different fault conditions can be signalled, e. g. sensor failures, excess or negative system pressure as well as errors in the flow rate, such as a dry run of the pump.
The Alarm module AM1 ensures that occurring failures can be immediately recognised and repaired, even if the system and the controller are difficult to access or located in a remote place. Thus, the reliability and the stable yield of the system are ensured.
- Reliable failure signal by LED
- Connection to a building management system (BMS) possible
- Supply and control via RESOL VBus®
SD3 Smart Display
The RESOL Smart Display is designed for simple connection to RESOL controllers with RESOL VBus®. It is used for visualising data issued by the controller: collector temperature, storage temperature and energy yield of the solar thermal system. The use of high-efficient LEDs and filter glass assures a high optical brilliance and good readability even in poor visibility conditions and from a larger distance. An additional power supply is not required.
- Simultaneous visualisation of collector and storage temperature as well as heat quantity
- One 6-digit and two 4-digit 7-segment LED displays
- Simple connection via RESOL VBus®
- Power supply via RESOL VBus®
- Outstanding design
STA-W module
The STA-W module is an interface designed
for the exchange of heat quantity
measurement values between RESOL
devices and external appliances. It can
be connected to a RESOL controller or
a calorimeter via the VBus®. Whenever
the heat quantity increases by 1 kWh, the module operates a potential-free
contact which is connected to the
central building management system.
the total number of operated contacts
can be visualised as heat quantity by
the software of the central building
management system.
GA3 Large Display
The RESOL GA3 is a completely mounted large display module for visualisation of collector- and storage temperatures as well as the heat quantity yield of the solar system via one 6-digit and two 4-digit 7-segment-displays. An easy connection to all controllers by RESOL VBus® is possible. Stainless steel frame with high quality multiplex wood elements and mounting plates for interior wall mounting. The front plate is made of antireflective filterglass and is printed with a light-resistant UV-lacquering.The universal RESOL VBus® allows the parallel connection of 8 large displays as well as additional VBus® modules. The bus line can be extended using a standard two-wire line.
- Visualisation of collector and store temperature as well as of heat quantity
- One 6-digit and two 4-digit 7-segment LED displays
- Easy connection via RESOL VBus®
- Anti-reflective window
- Power supply via mains adapter
- Automatic controller recognition
RSS-Feed